System Event; Figure 38 ─ Health Check Setup Screen - Eneo DLR-1004/500V Operating Instructions Manual

Highlight the box under the Notify heading and press the
On and Off by highlighting Notification and pressing the
items On and Off by highlighting that item and pressing the
the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification
setup screen and the DVR should be registered in the RAS (Remote Administration System).

System Event

Highlight System Event in the Event menu and press the
screen appears.
Figure 38 ─ Health Check setup screen.
Highlight the Setup... box beside Check Recording and press the
Recording screen appears.
The DVR can be configured to run
self-diagnostics and report the results.
Highlighting the box beside System and
pressing the
interval that you want the DVR to run
self-diagnostics on the system. You can select
from 1 hr. to 30 days or Never.
Highlighting Schedule On and pressing the
toggles On and Off. When set to On, you can select the day,
time range and interval that you want the DVR to run
self-diagnostics on the recorder. The Interval can be
selectable from 1 min. to 7 days or Never. The
allows you to delete a check recording schedule.
4-Channel Digital Video Recorder
button. You can toggle the entire list
button. You can toggle the individual
button. Highlight OK and press
button. The System Event setup
button allows you to select the
button. The Check
button
box
33