System Event; Figure 57 - Health Check Screen; Figure 58 - Storage Screen - Eneo DLR4-08 Operating Instructions Manual

Operating Instructions

System Event

Highlight System Event in the Event menu and press the
Figure 57 — Health Check screen
Highlighting the box under the Interval heading beside each alarm-in and pressing the
interval that you want the DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30 days or Never.
Highlight the Storage tab, and the Storage screen displays.
Figure 58 — Storage screen.
Highlight the second box beside Disk S.M.A.R.T., and press the
(Fahrenheit), and press the
40
The DVR can be configured to run self-diagnostics and report
the results.
Highlighting the box beside System and pressing the
allows you to select the interval that you want the DVR to run
self-diagnostics on the system. You can select from 1 hr. to
30 days or Never.
Highlight the Setup... box beside Check Recording and press the
button. The Check Recording screen appears.
Highlighting Schedule On and pressing the
Off. When set to On, you can select the day, time range and interval that
you want the DVR to run self-diagnostics on the recorder. The Interval
can be selectable from 1 min. to 7 days or Never. The
you to delete a check recording schedule.
Highlight the box beside Disk Bad Notify, and press the
button. Select percentage level of bad disk sectors at which
you want the DVR to trigger an alert. Percentage levels range
from 10% to 90%.
Highlight the box beside Disk Almost Full Notify, and press
the
which you want the DVR to trigger an alert. Percentage levels
range from 80% to 99%.
Highlight the first box beside Disk S.M.A.R.T., and press
the
through the numbers. Refer to the hard disk drive
manufacturer's documentation for the correct temperature
setting. If the temperature of hard disk drive exceeds the
defined threshold, the system triggers an alert.
button.
button. The System Event setup screen appears.
button allows you to change the
button. Select the percentage level of disk usage at
button. Use the Up and Down arrow buttons to scroll
button. Select either ºC (Celsius) or ºF
button
button toggles On and
box allows