Table of Contents
Advertisement
2
3
Fig. - Main control box
1. ECU
2. Fuses
3. Main relay
Fig. - Battery compartment
1. Master switch
2. Main fuses panel
2020-01-06
Electrical system
The machine's main control box (1) is located on the rear of
the operator platform. There is a plastic cap over it and the
fuses.
A 24V jack is available in the plastic cap.
1
The fuses inside the engine compartment are located
2
alongside the battery master switch.
The roller is equipped with a 24V electrical system, supplied
by an AC alternator.
1
Connect the batteries to the correct polarities
(negative posts to the mass). NEVER disconnect
the cable between the battery and the alternator
when the engine is operating.
4812314580EN
Electrical system
119
Advertisement
Table of Contents
