Adjusting Copy Options; Selecting The Tray; Selecting The Original Document Type - Xerox Phaser 6121MFP User Manual

Copying

Adjusting Copy Options

This section includes:
•

Selecting the Tray

on page 78
•

Selecting the Original Document Type

• Selecting Color or Black and White Copies
• Reducing or Enlarging the Image
• Making the Image Lighter or Darker
• Changing the Default Copy Settings
Selecting the Tray
In some cases, you may want to make copies on letterhead, colored paper, or card stock. Load the
special paper in Tray 1 and then select Tray 1 in the printer control panel copy menu.
To select the tray:
1. On the printer control panel, press the Copy button.
2. Press the OK button.
Note: The display shows options to choose from. Your choices will depend on your printer
configuration. For example, Tray 2 (the 500-sheet feeder) is optional and only available with
Phaser 6121MFP/N and /D printer configurations.
3. Press the Up Arrow or Down Arrow buttons to go to the desired option, then press OK.
Selecting the Original Document Type
The scanner optimizes the appearance of the output based on the content type of the document being
copied: mostly text, a photo or illustration, or a mixture of both.
To select the original document type:
1. On the printer control panel, press the Copy button.
2. Press the Down Arrow button to go to Original and then press the OK button.
3. Arrow down to the desired mode:
Mixed: (Factory default) For copying documents containing both text and photographs, such
•
as magazines and brochures.
• Fine Mixed: Same as Mixed but for higher resolution.
• Photo: For copying photographs.
• Fine Photo: Same as Photo but for higher resolution.
Text: For copying a document containing all or mostly text.
•
• Fine Text: Same as Text but for higher resolution.
4. Press OK.
78 Phaser 6121MFP Multifunction Printer
User Guide
on page 78
on page 79
on page 79
on page 79
on page 80