Selecting Paper Tray Settings - Xerox Phaser 6121MFP User Manual

Multifunction printer
Hide thumbs Also See for Phaser 6121MFP:
Table of Contents

Advertisement

Printing
2. Remove the lid from the tray and then press down on the paper pressure plate to lock it into place.
3. Load the paper faceup in the tray. Do not add paper above the 100% mark (see picture below on
the right).
4. Reattach the lid to the 500-sheet feeder and then reinsert the tray into the printer.

Selecting Paper Tray Settings

Note:
Paper type settings must match those of the actual paper loaded in the trays; otherwise,
print quality problems can occur.
To select the paper tray:
1. Load the paper into the desired tray.
2. On the printer control panel, press the Copy button.
3. On the printer control panel, press the OK button to access the tray settings.
Note:
If you have the optional 500-sheet feeder installed, you will see "Tray 2" as a tray choice. If
not, you will only see options for Tray 1.
4. Use the Down Arrow button (if necessary) to select the desired tray and then press OK.
5. Arrow down to the desired paper type and press OK.
6. Arrow down to the desired paper size and press OK.
62
Phaser 6121MFP Multifunction Printer
User Guide
6115-029
6121-031
6121-030
6121-032

Advertisement

Table of Contents
loading

This manual is also suitable for:

6121mfpv_s

Table of Contents