Cleaning The Interior - Xerox Phaser 6121MFP User Manual

Cleaning the Interior

This section includes:
• Cleaning the Media Rollers
• Cleaning the Auto Document Feeder Feed Rollers
• Cleaning the 500-Sheet Feeder Feed Rollers
• Cleaning the Duplex Unit Feed Rollers
• Cleaning the Laser Lens
After clearing paper jams or replacing the imaging unit, inspect the inside of the printer before closing
the printer covers.
Warning: Never touch a labeled area found on or near the heat roller in the fuser when hot. You
can get burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it until
the printer has cooled down sufficiently. To avoid injury, switch off the printer and wait 20 minutes
for the fuser to cool.
• Remove any remaining pieces of paper.
• Remove any dust or stains with a clean, dry cloth.
Cleaning the Media Rollers
The accumulation of paper dust and other debris on the media rollers can cause paper-feeding
problems.
To clean the media rollers:
1. If there is paper in the output tray (Tray 1), remove it, remove the dust cover and then fold up the
output tray before opening the printer top.
on page 163
on page 166
on page 168
6121-211
on page 165
on page 165
Phaser 6121MFP Multifunction Printer
Maintenance
6121-184
User Guide
163