Cleaning The Exterior - Xerox Phaser 6121MFP User Manual

Maintenance

Cleaning the Exterior

Clean the exterior of the printer about once a month. Wipe the parts with a damp, soft cloth. Then
wipe with another dry soft cloth. For stubborn stains, apply a small amount of neutral detergent to the
cloth and gently wipe the stain off.
Caution: Do not spray the detergent directly on the printer. The liquid detergent may enter the
printer through a gap and cause problems. Never use cleaning agents other than water or neutral
detergent.
Auto Receive
Phaser 6122MFP
Phone book
Redial / Pause
C M Y K
On Hook
Regular cleaning keeps the menu display and
control panel free from dust and dirt. To remove
finger prints and smudges, clean the display and
control panel with a soft, lint-free cloth.
Keep the vents clear of dust and debris. Use a
cotton swab to clean the vents.
162 Phaser 6121MFP Multifunction Printer
User Guide
Alert .@-_ ABC DEF
1 2 3
Fax Scan Copy
GHI JKL MNO
4 5 6
Stop
Start
PQRS TUV WXYZ
7 8 9
abc/123 # & ~
* *
* 0 #
Menu
6115-043
6121-044
Use a lint-free cloth to clean the auto document
feeder, output trays, paper trays, and outside
areas of your printer.
6115-045