Adjusting Scanning Options; Changing The Default Scan Settings - Xerox Phaser 6121MFP User Manual

Adjusting Scanning Options

This section includes:
•

Changing the Default Scan Settings

• Selecting Scan Settings for a Single Job
Changing the Default Scan Settings
This section includes:
• Setting the Scan Resolution
• Setting the Scanned Image File Type
• Setting the Original Document Type
• Setting the Default Scan Destination
For a complete list of the default settings, see
Setting the Scan Resolution
You can change the scan resolution to fit the way you plan to use the scanned image. Scan resolution
affects both the size and image quality of the scanned image file. The higher the scan resolution, the
larger the file size.
To select the scan resolution:
1. On the printer control panel, press the Scan button.
2. Press the Down Arrow button to go to Scan Default and then press the OK button.
3. At Resolution, press OK.
4. Select one of the following options, and then press OK:
• 150 dpi: (factory default) Produces the lowest resolution and smallest file size.
• 300 dpi: Produces medium resolution and a medium file size.
Note: You can obtain a higher scan resolution using the TWAIN scan driver available from the Scan
Dashboard. For information, see
on page 105
on page 107
on page 105
on page 106
on page 106
on page 106
Scan Default Setup Menu
Using the Scan Dashboard
on page 150.
on page 98.
Phaser 6121MFP Multifunction Printer
Scanning
105
User Guide