6. After removing the paper, return the fuser separator levers to their original positions.
7. Slowly insert the imaging unit vertically and then push it slightly down toward you to finish
reinstalling the unit.
8. Close the printer top.
Clearing Jams at Tray 1
1. Remove the dust cover from Tray 1.
2. Carefully pull out the misfed paper.
Note:
If the paper cannot be removed, instead of pulling on it with extra force, clear the misfeed
from the inside of the printer using the procedure described in
the Printer)
on page 196.
3. Reattach the dust cover on Tray 1.
4. Press the Start button to continue printing.
6121-200
6121-198
Clearing Jams at the Fuser (Inside
Phaser 6121MFP Multifunction Printer
Troubleshooting
6115-203
199
User Guide