Scanning from the Scan Dashboard
Note:
The Scan Dashboard is a Windows-only utility.
From the Scan Dashboard, you can:
•
Scan using Push To Scan. From the Scan Dashboard, Push To Scan is one-button scanning
using preconfigured settings assigned to the Scan Dashboard's Start buttons. For setup
information, see
•
Scan to a folder on your computer. For single-job scanning without saving the settings, see
Scanning to a Folder
Setting Up Scan Mode Buttons
•
Scan to applications on your computer. You will need to set up scanning to the application in
the Scan Dashboard if you want one-button access to the application from the Scan
Dashboard; otherwise, you do not need to do any initial setup. For information on setting up
scanning to applications from the Scan Dashboard, see the Scan Dashboard Online Help: from
the Scan Dashboard, click the Help button.
Scan to a printer. No initial setup is necessary.
•
•
Scan to the Clipboard. No initial setup is necessary.
Scanning to an Application on Your Computer
No setup at installation is necessary.
Setting Up Push To Scan
on page 101. To assign settings to the Scan Dashboard Mode buttons, see
on page 99.
on page 98.
Phaser 6121MFP Multifunction Printer
Scanning
91
User Guide