Xerox Phaser 6121MFP User Manual page 182

Troubleshooting
Message
Remove original
in document feeder
Results are over (xxx)
Reload (xxx) original
into document feeder
and press Start key
Memory full
at SMTP Server
Recipient memory is
full, cannot accept
fax or Email
Toner life end
Replace (CMYK) toner
Toner empty
Replace (CMYK) toner
Toner Low (xx)
Tray 2 open
Close Tray 2
Toner Memory Error
USB Dev. Not support
USB Hub Not support
USB memory full
182 Phaser 6121MFP Multifunction Printer
User Guide
Reason
The document is loaded in the auto
document feeder while a function is
set that requires scanning from the
document glass.
The LDAP search results exceed the
maximum specified with Max.
Search Results in the LDAP Setting
menu.
After a paper jam has been cleared
from the auto document feeder, the
number of document pages to be
reloaded into the auto document
feeder is indicated.
The memory of the SMTP server has
become full.
The maximum number of 236
destinations for the scan data has
been reached.
The indicated toner cartridge has
become empty.
The indicated toner cartridge has
become empty. (This message
appears if Toner Out Action in the
General Setup menu is set to Stop
All.)
The indicated toner cartridge is
nearly empty.
Tray 2 cassette is open.
A memory error occurred in the
toner cartridge.
A USB device incompatible with this
printer is connected.
A USB hub is connected to this
printer.
There is no space available on the
USB memory device connected to
this printer.
Action
Remove the document from the auto
document feeder and place the
document on the document glass.
Change the maximum setting, or
change the search conditions (for
example, increase the length of the
search word), and then try performing
the LDAP search again.
Reload into the auto document feeder
the number of document pages
indicated by (xxx) and then press the
Start button.
Free up some space on the disk. If
necessary, contact your SMTP server
administrator.
Send the data and then try scanning
again. Otherwise, delete unnecessary
destinations before adding the desired
ones.
Replace the indicated toner cartridge.
Prepare the indicated toner cartridge.
Close the tray by properly inserting and
seating the tray in the printer.
Re-install the specified toner cartridge.
Disconnect the USB flash drive from this
printer and try a different USB device.
This printer is not compatible with a
USB hub. When connecting USB cables
to this printer, do not use a USB hub.
Delete data from the USB flash drive to
create free space, or use a different USB
flash drive.