Selecting Scan Settings For A Single Job - Xerox Phaser 6121MFP User Manual

Selecting Scan Settings for a Single Job

To temporarily change a scan setting when emailing the scanned image:
1. On the printer control panel, press the Scan button.
2. Select the scan destination and then press the OK button.
3. Press the Down Arrow button to move through the menu settings. Select a setting to change and
then press OK.
4. Change the selected setting as desired and then press OK.
Note: For a list of setting options, see
5. Press the desired Start button to begin the scan.
Scan Menu – Main on page 149.
Phaser 6121MFP Multifunction Printer
Scanning
107
User Guide