Adjusting Copy Options; Basic Settings - Xerox WorkCentre 7425 User Manual

Copying

Adjusting Copy Options

This section includes:
•

Basic Settings

on page 90
• Image Quality Adjustments
• Layout Adjustments
• Output Format Adjustments
• Advanced Copying
Basic Settings
Use the Copy tab to change the following basic settings:
• Selecting Color or Black & White Copies
• Reducing or Enlarging the Image
• Selecting the Tray to Use for Copies
• Specifying 2-Sided Originals for Copies
• Collating Copies on page 92
• Stapling Copies on page 93
• Folding Copies on page 93
• Hole Punching Copies
• Booklet Creation on page 93
Selecting Color or Black & White Copies
If the original document contains color, you can create copies in full color, a single color
(monochrome), or in black and white.
To select the output color:
1. Touch Copy on the touch screen.
2. Select the output color:
• Auto Detect: detects the color content in the original document, and makes copies in full color
if the original is a color document, or in black only if the original is a black and white document.
• Color: Copies in full color output using all four printing colors (cyan, magenta, yellow, and
black).
Black & White: Copies in black and white only. Colors in the original are converted to shades of
•
gray.
3. For copies printed in shades of a single color:
a. Touch the Image Quality tab, then touch Color Effects.
b. Touch Single Color, then touch one of the six color choices.
c. Touch Save.
90 WorkCentre 7425/7428/7435
User Guide
on page 94
on page 97
on page 100
on page 105
on page 90
on page 91
on page 91
on page 92
on page 93