Faxing
4. Set the following features as desired, pressing OK after each selection:
•
Lighten/Darken: Specifies the toner density level of the image or text.
•
Quality Default: Specifies the resolution of the scanned image being faxed.
•
Send Mode: Scan then Dial (default) or Dial then Scan.
Header: On or Off. When On, transmission source information is included in the fax
•
transmission: date and time, transmitter's name and fax number, session number, page
number, and total page number.
•
Reset to Default?: When selected, resets all Send options to their original factory defaults.
See also:
Fax Send Options Setup Menu
124
Phaser 6121MFP Multifunction Printer
User Guide
on page 156