Cleaning The Printer Interior - Xerox AltaLink B8145 Series User Manual

Maintenance
C L E A N I N G T H E P R I N T E R I N T E R I O R
Cleaning the Printhead Lens
The printhead lens requires regular cleaning to maintain print quality. Clean the printhead lens every time the
associated drum cartridge is replaced, or if print quality starts to degrade. For example, if prints have voids or light
streaks, use the following instructions to clean the LED lens:
W W a a r r n n i i n n g g : :
If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some
toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets on your skin,
wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out immediately with
cool water and consult a doctor.
C C a a u u t t i i o o n n : :
Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the printer.
2. Remove the waste toner transport unit:
a. To unlock the waste toner transport unit, rotate the locking lever 45 degrees counterclockwise.
238
Xerox ® AltaLink ® B8145/B8155/B8170 Series Multifunction Printer User Guide