Table of Contents
Advertisement
User Information Retrieval Via SA Key
The process for retrieving User information is the same as that for retrieving audit information (The only difference is
that the SA key has been initialized to retrieve User information rather than audit information). To retrieve information:
Step
1.
Power lock.
2.
Enter Master User or a
Manager User combination.
3.
Press
then 01.
4.
Insert SA Key into Key reader.
Note: If at any time during the procedure the lock power drops below a sufficient level for operation, the lock
will continually beep and flash the red LED, prompting the user to depress the outside lever to provide additional
power within five seconds.
5.
Ensure lock remains powered
and SA Key remains in reader
until complete.
User Information Retrieval Via Palm Organizer
Step
1.
Connect Palm Organizer
to lock
2.
Power lock.
3.
Enter Master User or a
Manager User combination.
4.
Press
then 6.
5.
Retrieve user information.
6.
View user information on
Palm Organizer.
32
Detailed Instructions
Power the lock by depressing the outside lever.
Enter the Master User or a Manager User combination. The lock will beep/
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
followed by the red LED, and all digits of the combination must be re-
entered. The lock responds with three beeps/flashes of the green LED to
indicate available entry. If the combination is not valid, the lock responds with
three beeps/flashes of the red LED.
Before re-lock time expires, press
then the 1 key again. The lock responds with one beep/flash of the green
LED every second until the SA key is inserted into the lock key reader.
Insert the SA Key into the lock key reader.
Ensure that the lock remains powered and the SA Key remains in the reader
until the lock has completed downloading the reporting data. Upon compl-
tion reporting data. Upon completion, the lock responds with two simultane-
ous beeps/flashes of the green and red LEDs.
The lock user table has now been downloaded to the SA Key.
Detailed Instructions
Connect the Palm Interface Module to the lock using the interface cable.
Power the lock by depressing the outside lever.
Enter the Master User or a Manager User combination. The lock will beep/
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
followed by the red LED, and all digits of the combination must be re-
entered. The lock responds with three beeps/flashes of the green LED to
indicate available entry. If the combination is not valid, the lock responds with
three beeps/flashes of the red LED.
Before re-lock time expires, press
lock responds with one beep/flash of the green LED every second
until the Palm interface cable has been inserted into the lock communication
connector.
Turn on the Palm organizer and tap the Connect to Lock button at the bot-
tom of the Main Menu. Tap the Get User Table button on the top of the
Connect to Lock menu. After all audit records have been retrieved, tap the
Disconnect button at the bottom of the Connect to Lock menu. Upon comple-
tion of the Palm operations, the lock responds with two simultaneous
beeps/flashes of the green and red LEDs.
To view user information on the Palm Organizer, select the report to view by
tapping the description of the transaction. The line will highlight to show the
transaction selected. Next, tap the View button at the top of the screen. The
View form will display. The type of data will be displayed in the Title Bar. The
(Enter key) followed by the 0 key and
(Enter key) followed by the 6 key. The
Advertisement
Table of Contents
