Additional Lock Operations - Kaba PowerLever 455 Series Operating Instructions Manual

Master User / Manager Users
1. Add Keypad Access User(s) (page 17)
- or -
Load Lock User Table Data (page 33)
Key Access Users
1. Change PIN* (page 19)
* If PIN length is not 0.
2. Open Lock (page 21)
Keypad Access Users
1. Change PIN* (page 18)
* If PIN length is not 0.
2. Open Lock (page 20)

Additional Lock Operations

The following provides a brief list of the lock operations that may be performed after initial setup and startup activities
have been completed. The instructions for performing these activities are located on the indicated pages.
Master User
1. Change Combination (page 19)
2. Deactivate a Manager User (page 28)
3. Shelve the Lock (page 29)
Master User / Manager Users
1. Add Keypad Access User(s) (page 17)
2. Delete Keypad User(s) Using the Keypad (page 26)
3. Delete Key Access User(s) Using the Keypad (page 27)
4. Delete a Key Access User Using the Smart Key (page 28)
5. Issue Service User Combination (page 21)
6. Remove Service User Combination (page 22)
7. Enable a Keypad User (page 24)
8. Disable a Keypad User (page 25)
9. Enable a Key Access User (page 25)
10. Disable a Key Access User (page 26)
11. Retrieve User Information (page 31)
12. Switch Passage Function (Off/On) (page 23)
13. Change Keypad User PIN Field Length (page 29)
Master User / Manager Users / Access Users
1. Change PIN* (page 19)
* If PIN length is not 0.
Audit Users
1. Retrieve Audit Records (page 30)
All Users
1. Open the Lock (page 20)
2. Retrieve Audit Records (page 30)
3. Enable Palm Communications (page 35)
13