Table of Contents
Advertisement
Extended operations will require a charging cycle approximately every 15 sec-
onds. A monitor will provide audio and visual cues to the user when lock power
drops below a sufficient level for operation. The lock will continually beep and
flash the red LED, prompting the user to depress the outside lever to provide
additional power within 5 seconds.
Lock Entry Methods
The latch will not be engaged to unlock the door unless one of the following
actions occurs:
1. A valid combination is entered by an authorized user.
Caution: When opening the lock with a combination, do not depress the outside
lever until the lock responds with three beeps/flashes of the green LED to indi-
cate available entry.
2. The Passage Function is programmed to maintain the lock in the unlocked
position. No combination is required to open the lock when the it is in this
state of operation.
3. A mechanical key is used to retract the latch.
Note: The door can always be opened from the inside by depressing the inside
lever.
Additional Materials
A Quick Reference Guide that documents all lock operations for the PowerLever
Series - Model 15xx is included with the lock. A two-sided Quick Reference User
Card is also included and provides an "at-a-glance" quick summary of instruc-
tions for performing the two basic Access User lock operations.
User Information
Before attempting to operate the lock, it is very important that you familiarize
yourself with the types of users and the terminology associated with user identifi-
ers, PINs, and combinations.
Lock Personnel Classifications
Four different user classifications of personnel can access the lock:
• Master User - The Master User is the top-level manager who performs the
initial lock setup activities and can program all lock functions. The Master User
combination will open the lock. There is a maximum of one Master User per
lock.
2
• Manager User - The Manager User is the second-tier manager who can pro-
gram all lock functions except for 1) adding/deleting the Master User and Man-
ager User, 2) activating the lock and 3) shelving the lock. The Manager User
combination will open the lock. There is a maximum of one Manager User per
lock.
• Access User - A user added by the Master User or Manager User who has
the ability to open the lock. Users can be added individually at the lock.
• Service User - A single user authorized for a one-time entry. This combina-
tion is automatically deleted after use.
Note: All users, regardless of personnel classification, will occupy one of the
available User ID positions when added to the lock. A User ID is unique to a
particular user; i.e., no two users can have the same User ID.
The Master User and Manager User are referred to as managerial users or
managerial personnel throughout this guide.
The following chart shows the activities that can be performed by each
personnel classification.
Activity
Determine Model Type
Change User ID & PIN Lengths
Activate Lock
Activate/Deactivate Manager User
Set Re-Lock, Wrong Try Penalty
Add/Delete Access User(s)
Change PIN
Open Lock
Issue Service User Combination
Remove Service User Combination
Change Combination (User ID + PIN)
Enable/Disable User ID or Group
Switch Passage Function
Shelve Lock
* Only to increase User ID or PIN length while lock is Activated.
Master Manager Access
Service
User
User
User
User
*
3
Advertisement
Table of Contents
