Table of Contents
Advertisement
Step
Caution: If you are deleting multiple Key Access User IDs, you may need to depress the
outside lever to provide additional power.
7.
Press
.
Delete Key Access User Using the Smart Key
Step
1.
Power lock.
2.
Enter Master User or a
Manager User combination.
3.
Press
then 32.
4.
Insert the Key of the Access
User to be deleted into the
key reader.
Deactivate a Manager User
Step
1.
Power lock.
2.
Enter Master User
combination.
3.
Press
then 91.
4.
Enter a Manager User ID.
5.
Enter the Manager User
ID again.
28
Detailed Instructions
Press
(Enter key) to exit this procedure. The lock responds with two
simultaneous beeps/flashes of the green and red LEDs and exits this
procedure.
Detailed Instructions
Power the lock by depressing the outside lever.
Enter the Master User or a Manager User combination. The lock will beep/
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
followed by the red LED, and all digits of the combination must be re-
entered. The lock responds with three beeps/flashes of the green LED to
indicate available entry. If the combination is not valid, the lock responds with
three beeps/flashes of the red LED.
Before re-lock time expires, press
then the 2 key. The lock responds with two beeps/flashes of the green LED.
Insert the Key of the Access User to be deleted into the lock key reader.
The lock responds with two simultaneous beeps/flashes of the green and
red LEDs and exits this procedure. The lock responds with two beeps/
flashes of the red LED if the Access User's Key is not valid.
The Key Access User is now deleted.
Detailed Instructions
Power the lock by depressing the outside lever.
Enter the Master User combination. The lock will beep/flash the green LED
on each keystroke entered. If the Clear key is pressed during data entry, the
lock responds with one beep/flash of the green LED followed by the red
LED, and all digits of the combination must be re-entered. The lock responds
with three beeps/flashes of the green LED to indicate available entry. If the
combination is not valid, the lock responds with three beeps/flashes of the
red LED.
Before re-lock time expires, press
then the 1 key. The lock responds with two beeps/flashes of the green LED.
Enter a Manager User ID. The lock responds with two beeps/flashes of the
green LED if the Manager User ID is allowed within the current lock configu-
ration. The lock responds with two beeps/flashes of the red LED to indicate
an error.
Re-enter the Manager User ID again for verification. The lock responds with
two simultaneous beeps/flashes of the green and red LEDs if the Manager
User ID was verified successfully. The lock responds with two beeps/flashes
of the red LED to indicate an error.
The specified Manager User has now been deactivated.
(Enter key) followed by the 3 key and
(Enter key) followed by the 9 key and
Advertisement
Table of Contents
