Table of Contents
Advertisement
9
PARAMETERS SETTING
CAUTION: Please change the controller parameters when generator is in standby mode only (e. g.
configurable input, configurable output, various delay), otherwise, alarming to stop and other abnormal
conditions may happen.
NOTE: Maximum set value must over minimum set value in case that the condition of too high as well
as too low will happen.
NOTE: When setting the warning alarm, please set the correct return value; otherwise, maybe there is
abnormal alarm. When setting the maximum value, the return value must less than setting; when setting
the minimum value, the return value must over setting.
NOTE: Configurable input could not be set as same items; otherwise, there are abnormal functions.
However, the configurable output can be set as same items.
HGM9560 Bus Tie Mains Parallel Unit
Page 35 of 47
Advertisement
Table of Contents
