Lcd Display; Mmain Display - Smartgen HGM9560 User Manual

4.3 LCD DISPLAY

4.3.1

MMAIN DISPLAY

Main screen show pages; use to scroll the pages and to scroll the screen.
★Main Screen, including as below,
Mains: voltage, frequency, current, active power, reactive power
Bus: voltage, frequency, active power, reactive power
Some status
★Status, including as below,
Module status, mains status, ATS status
★Bus, including as below,
Phase voltage, line voltage, frequency, phase sequence, multi-genset total power
NOTE: If load current transformer is enabled, this page also includes: current, active power, reactive power,
apparent power, power factor.
★Mains, including as below,
Phase voltage, line voltage, frequency, phase sequence, current, active power(positive and negative), total
active power (positive and negative), reactive power(positive and negative), total reactive power (positive and
negative), apparent power, total apparent power, power factor(positive and negative), average power factor
(positive and negative), accumulated energy (kWh, kVarh, kVAh), earth current, negative sequence current,
ROCOF (rate of change of frequency), VS (vector shift).
★SNYC, including as below,
Voltage difference, frequency difference, angle difference, Bus active power percentage, Bus target active
power percentage, Bus reactive power percentage, Bus target reactive power percentage, MSC status
★Alarm
Display all alarm information (warning alarm, shutdown alarm, trip and stop alarm, trip alarm, mains trip).
★Event log
Make records about all start/stop events (shutdown alarm, trip and stop alarm, manual /auto start or stop) and
the real time when alarm occurs.
★Others, including,
Time and Date, maintenance due, input/output ports status.
★About, including,
Issue time of software and hardware version, product PD number.
HGM9560 Bus Tie Mains Parallel Unit Page 11 of 47