201 Paper Jams - Lexmark MX61 Series Service Manual

201 paper jams

201 paper jam messages
Error code Description
201.01 Narrow media sensor is covered during warm up.
Input sensor is not covered.
201.20 Took too long to ramp up auger motor.
201.21 Stopped detecting pulses from auger motor's
encoder system.
201.22 Auger motor underspeed error.
Sensor (narrow media) jam service check
Action
Step 1
Check the narrow media sensor for jammed media fragments.
Is the paper path free of partially fed or jammed media?
Step 2
Check the narrow media sensor cable JNRW1 for proper
connection.
Is it properly connected?
Step 3
POR into the Diagnostics menu and perform a sensor test:
Diagnostics Menu > Base Sensor Test > Narrow Media
Does the sensor state on the control panel display change when
it is toggled?
Step 4
Does the error remain?
Action
Go to
check" on page
Go to
page
Go to
page
Go to
page
Diagnostic information
79
"Sensor (narrow media) jam service
79.
"Cartridge gearbox service check" on
142.
"Cartridge gearbox service check" on
142.
"Cartridge gearbox service check" on
142.
Yes No
Go to step 2. Clear the paper path
of any media
fragments.
Go to step 3. Reseat the cable.
Go to step 4. Replace the narrow
media sensor.
Contact the next The problem is
level of support. solved.
7016