Restore Held Jobs; Scanner Automatic Feeder Cover Open; Scanner Disabled By Admin [840.01]; Scanner Disabled. Contact System Administrator If Problem Persists. [840.02] - Lexmark MX61 Series Service Manual

Restore held jobs?

Try one or more of the following:
•
From the printer control panel, touch Restore to restore all held jobs stored in the printer hard disk.
•
From the printer control panel, touch Do not restore if you do not want to restore any of the print jobs.

Scanner automatic feeder cover open

Close the ADF cover.

Scanner disabled by admin [840.01]

Print without the scanner, or contact your system support person.
Scanner disabled. Contact system administrator if problem
persists. [840.02]
Try one or more of the following:
•
Touch Continue with scanner disabled to return to the home screen, and then contact your system
support person.
•
Touch Reboot and automatically enable scanner to cancel the job.
Note: This attempts to enable the scanner.

Scanner jam, remove all originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Scanner jam, remove jammed originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Serial port [x] disabled [56]

Try one or more of the following:
•
From the printer control panel, touch Continue to clear the message.
The printer discards any data received through the specified serial port.
•
Make sure Serial Buffer is not set to Disabled.
•
From the printer control panel, set Serial Buffer to Auto in the Serial [x] menu.

SMTP server not set up. Contact system administrator.

From the printer control panel, touch Continue to clear the message.
Note: If the message appears again, then contact your system support person.
Diagnostic information
120
7016