Bottom side removals
Power supply removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
on page
343.
3
Disconnect the fuser cable from the power supply, and disconnect the transfer roll cable from the left side
of the printer.
4
Position the printer so that it sits on its right side.
5
Remove the five metal screws (A) and the plastic screw (B) securing the power supply.
6
Remove the power supply, and then disconnect the cable from the power supply.
Power supply shield removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
on page
343.
3
Remove the power supply. See
4
Position the printer so that it sits on its right side.
"Left cover removal" on page
"Rear exit door removal" on page 342
"Left cover removal" on page
"Rear exit door removal" on page 342
"Power supply removal" on page
Repair information
323
264.
and
264.
and
323.
7016
"Rear cover removal"
"Rear cover removal"