201 Paper Jams; X]‑Page Jam, Clear Standard Bin. [20Y.xx - Lexmark MS315 Service Manual

Main drive motor control jam service check
Action
Step 1
a
Remove the main drive gearbox.
b
Check the main drive gearbox cable for proper connection.
Is it properly connected?
Step 2
a
Remove the main drive gearbox.
b
Check the gears of main drive gearbox for wear or damage.
Are they free of wear or damage?
Step 3
Check the main drive motor for proper operation:
a
Remove the main drive gearbox.
Note: Do not disconnect the main drive gearbox cable.
b
POR into the Diagnostics menu and perform a feed test:
Diagnostics menu > Input Tray Tests > Feed Test >
Select any input source
c
Check if the main drive motor rotates when doing the feed test.
Does it rotate when doing the feed test?
Step 4
Check the fuser gear for damage or toner contamination.
Is it free of damage and contamination?

201 paper jams

[x]‑page jam, clear standard bin. [20y.xx]
1
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2
From the printer control panel, press
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Replace the controller
board. See
board removal" on
page
to clear the message and continue printing.
Diagnostic information
50
No
Reseat the cable.
Replace the main drive
gearbox. See
drive gearbox
removal" on page
169.
Replace the main drive
gearbox. See
drive gearbox
removal" on page
169.
Replace the fuser. See
"Controller "Fuser removal" on
page 238.
187.
4514
"Main
"Main