Toner Starvation Service Check - Lexmark MX61 Series Service Manual

Action
Step 6
Replace the UICC. See
Does the error remain?
Step 7
Replace the controller board. See
page 282.
Does the error remain?

Toner starvation service check

Action
Step 1
a
Check if the toner cartridge is a supported and genuine
Lexmark supply. If not, then replace it.
b
Make sure that the toner cartridge is properly installed.
c
Check the toner cartridge and toner cartridge button for
damage. Replace if necessary.
d
Make sure that the latest firmware is installed.
Does the problem remain?
Step 2
Check the cartridge plunger.
Is the cartridge plunger properly attached to the front door and is
the spring functioning properly?
Step 3
a
Install a new cartridge plunger and spring. See
plunger removal" on page
b
Print some pages.
Did this fix the problem?
Step 4
Did a 201.22 error display?
Step 5
Try a different toner cartridge.
Did this fix the problem?
"UICC removal" on page
"Controller board removal" on
293.
Diagnostic information
Yes
Go to step 7.
302.
Contact the next
level of support.
Yes
Go to step 2.
Go to step 5.
The problem is
solved.
"Cartridge
Go to "Cartridge
gearbox service
check" on page
The problem is
solved.
189
7016
No
The problem is
solved.
The problem is
solved.
No
The problem is
solved.
Go to step 3.
Go to step 4.
Go to step 5.
142.
Go to step 6.