Actions
Step 1
Check the imaging unit for damage.
Is it free of damage?
Step 2
Remove any contamination from the imaging unit contacts.
Does the problem remain?
Step 3
Check the imaging unit contacts for damage.
Are they free of damage?
Shadow images check
Leading edge
A B C D
A B C D
A B C D
A B C D
Trailing edge
Actions
Step 1
Does the shadow image appear every two pages?
Step 2
Check the redrive assembly for wear or damage.
Is it free of wear or damage?
Step 3
Check the transfer roll for surface contamination or excessive wear.
Is it free of contamination and wear?
Step 4
Check the following fuser components for wear or damage:
•
Gears
•
Exit rollers
•
Belt fuser
Are they free of damage?
Diagnostic information
47
Yes
No
Go to step 2.
Replace the imaging
unit.
Go to step 3.
The problem is
solved.
Replace the power
Replace the printer.
supply. See
"Power
supply removal" on
page
323.
Yes
No
Go to step 2.
Go to step 3.
Go to step 3.
Replace the redrive
assembly. See
"Redrive assembly
removal" on
page
Go to step 4.
Replace the transfer
roll. See
roll removal" on
page
Go to step 5.
Replace the fuser.
See
removal" on
page
7016
343.
"Transfer
292.
"Fuser
346.