Index sensor removal
1
Remove the left cover. See
2
Remove the right cover. See
3
Remove the rear door and cover. See
on page
343.
4
Remove the power supply. See
5
Remove the power supply shield. See
6
Remove the duplex. See
7
Disconnect the cable JINDEX1 from the controller board.
8
Remove the screw (A).
9
Route off the cable, and then remove the index sensor.
Media present sensor removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
on page
343.
3
Remove the power supply. See
4
Remove the power supply shield. See
"Left cover removal" on page
"Right cover removal" on page
"Rear exit door removal" on page 342
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
"Left cover removal" on page
"Rear exit door removal" on page 342
"Power supply removal" on page
"Power supply shield removal" on page
Repair information
264.
277.
323.
324.
264.
323.
328
7016
and
"Rear cover removal"
323.
and
"Rear cover removal"
323.