General Information; Media Guidelines; Paper Guidelines - Lexmark MX61 Series Service Manual

General information

TM
The Lexmark MX610 and MX611 (7016‑6xx) are network‑capable, multifunction laser printers that print
monochrome print jobs. All information in this service manual pertains to all models unless explicitly noted.
The printers are available in the following models:
Model Configurations
MX610de Mono laser MFP, Networking, Duplex print, e‑task
7‑inch color touch screen
MX611de Mono laser MFP, Networking/Fax, Duplex print/scan,
e‑Task 7‑inch color touch screen
XM3150
MX611dhe Mono laser MFP, Networking/Fax, Duplex print/scan,
e‑Task 7‑inch color touch screen, Hard disk
The diagnostic information in this manual leads you to the correct field replaceable unit (FRU) or part. Use the
error code charts, symptom index, and service checks to determine the symptom and then repair the failure.
After you complete the repair, perform tests as needed to verify the repair.
To begin diagnosing a problem, go to
and reinstalling parts, see
parts.

Media guidelines

Additional information for printing on specialty media may be found in the Cardstock and Label Guide available
at http://support.lexmark.com.

Paper guidelines

Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample
of the paper or specialty media before buying large quantities.
Paper characteristics
The following paper characteristics affect print quality and reliability. Consider these characteristics when
evaluating new paper stock.
Weight
The standard printer trays can automatically feed paper weights up to 90‑g/m
The optional trays can automatically feed paper weights up to 120‑g/m
multipurpose feeder can automatically feed paper weights up to 163‑g/m
2
lighter than 60 g/m (16 lb) might not be stiff enough to feed properly, causing jams. For best performance, use
2
75‑g/m (20‑lb) bond grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 inches), it is recommended
2
to use 90 g/m (24 lb) or heavier paper.
Note: Two‑sided printing is supported only for 60–90‑g/m
"Diagnostic information" on page
"Repair information" on page
General information
Machine type / model
7016-630
7016-670
7016-679
7016-675
41. For information about removing
239. See "Parts catalog" on page 444
2
(32‑lb) bond grain long paper. The
2
(43‑lb) bond grain long paper. Paper
2
(16–24‑lb) bond paper.
31
to help identify
2
(24‑lb) bond grain long paper.
7016