Table of Contents
Advertisement
Maintenance
2000 - Lubricating oil system
Information
Make sure that the engine does not start.
u Reconnect TDC sensor.
u Check for leaks or damage.
u Retighten by hand only if necessary.
Information
On next engine start-up, a longer starting time is normal.
5.7.5 Removing and installing centrifugal oil filter cover and cover
clamp — SL1-2220, SL1-2221
Previous tasks
Make sure that the following preconditions are met:
q Preparatory maintenance activities are fulfilled.
p. 100)
Specific safety instructions
DANGER
Fire - Ignition of flammable materials and operating fluids: fuel, lubricating oil, or coolant!
Risk of death or injury by burn, scald, or asphyxiation.
u Make sure that no operating fluid comes into contact with a hot surface or an ignition
source.
u Before servicing the engine, let it cool down until surface temperature allows you to touch it
with bare hand.
u Before servicing the engine, make sure that the operating fluid pressures are relieved.
WARNING
Hazards by ejection of hot engine oil.
Hot engine oil could result in death or serious injuries by burns or skin penetrating oil.
u Avoid skin contact with the engine oil.
u Wear proper personal protective equipment.
Consumables and equipment
Not applicable.
146
© 2023 by Kohler Co. All rights reserved.
(→ 5.4 Preparatory maintenance activities,
KD62V12A 33521061401_1_1 EN_US
2023-10
Advertisement
Table of Contents
