Table of Contents
Advertisement
Fig. 65: Position of flywheel and turning device
Step 1
u Rotate the crankshaft in the direction of rotation until the turning device faces flywheel
marking 1.
u Make sure that cylinder A1 is in overlap position.
u If cylinder A1 is not in overlap position, rotate the crankshaft another 360°.
Step 2
u Rotate the crankshaft in direction of rotation until the turning device faces flywheel marking
2.
u Check the valve clearance for cylinders A5, A6, and B5.
valve clearance, p. 133)
Step 3
u Rotate the crankshaft in direction of rotation past flywheel marking 6.
Step 4
u Rotate the crankshaft in direction of rotation past flywheel marking 3.
Step 5
u Rotate the crankshaft in direction of rotation until the turning device faces flywheel marking
4.
u Check the valve clearance for cylinders A3, B1, and B3.
valve clearance, p. 133)
Step 6
u Rotate the crankshaft in direction of rotation past flywheel marking 5.
Step 7
u Rotate the crankshaft in direction of rotation past flywheel marking 1.
KD62V12A 33521061401_1_1 EN_US
2023-10
© 2023 by Kohler Co. All rights reserved.
Maintenance
1000 - Base engine
(→ tab. 33, p.
134).
(→ Checking
(→ tab. 33, p.
134).
(→ Checking
131
Advertisement
Table of Contents
