Collecting And Analyzing Oil Sample - Sl1-2021 - Kohler KD62V12A Operation And Maintenance Manual

Maintenance
2000 - Lubricating oil system
Fig. 74: Filling engine oil — right side
1 Oil dipstick
u Remove the oil filler neck cap.
u Fill with oil through oil filler neck 2.
u Fill with 322 L oil through oil filler neck 2.
w The oil level must be between the "min." and "max." marks on oil dipstick 1.
u Clean the oil filler neck cap.
u Install the oil filler neck cap on oil filler neck 2 and tighten by hand.
u If possible, start the engine to check the oil pressure.
u Stop the engine.
u After three minutes, check the oil level on oil dipstick 1.
overall condition — SL0-2011, p. 138)
u Top up with oil if necessary.
w Make sure that the oil level is between the "min." and "max." marks on the dipstick.
5.7.3 Collecting and analyzing oil sample — SL1-2021
Previous tasks
Make sure that the following preconditions are met:
q Preparatory maintenance activities are fulfilled.
p. 100)
142
2
© 2023 by Kohler Co. All rights reserved.
Oil filler neck
(→ 5.7.1 Inspecting oil system
(→ 5.4 Preparatory maintenance activities,
KD62V12A 33521061401_1_1 EN_US
2023-10