Table of Contents
Advertisement
Consumables and equipment
Make sure that the following consumables and equipment are available:
– Belt tension frequency meter
Inspection
Fig. 96: Belt drive system
1
Drive unit
u Inspect overall condition of the belt drive system of battery charging alternator.
u Inspect the belt and pulley.
u Check belt tension with a frequency meter.
u Record and report any defect.
If defect is detected:
u Make sure that authorized service personnel correct the defect.
battery charging alternator — SL1-6232, p. 173)
Specific values
Belt tension: 173 Hz (min. 138 Hz - max. 209 Hz)
5.11.4 Replacing belt of battery charging alternator — SL1-6232
Previous tasks
Make sure that the following preconditions are met:
q Preparatory maintenance activities are fulfilled.
p. 100)
q Cover of battery charging alternator is removed.
battery charging alternator — SL1-6235, p. 175)
KD62V12A 33521061401_1_1 EN_US
2023-10
2
(→ Specific values, p. 173)
© 2023 by Kohler Co. All rights reserved.
6000 - Electrical and control system
Belt
(→ 5.11.4 Replacing belt of
(→ 5.4 Preparatory maintenance activities,
(→ 5.11.5 Removing and installing cover of
Maintenance
173
Advertisement
Table of Contents
