Oil Filter Cartridge Replacement - Kohler KDI 3404TCR Owner's Manual

INFORMATION ABOUT REPLACEMENTS

6.2 Oil filter cartridge replacement

Important
• Before proceeding with operation, read
Warning
• Electric/pneumatic screwdrivers are forbidden.
• In case of low use replace il 12 months.
•
For disposal of oil filter cartridge and fuel filter refer to
DISPOSAL and SCRAPPING
1. Unscrew cartridge holder cover A by performing three complete
turns and wait 1 minute..
NOTE : this operation allows to oil contained in the support F to flow into
the oil sump in the correct way.
2. Unscrew cartridge holder cover A and check that the oil in the
lub. oil filter support F has flowed towards the oil sump.
3. Remove the cap A as well as the oil cartridge B from the oil filter
support.
4. Remove and replace the oil cartridge B with a new one.
Remove and replace the gaskets C, D and E with new ones.
1. Fit and tighten the cover A on the oil filter support F , tightening
it with a torque wrench G (tightening torque of 25 Nm ).
NOTE: Click on the icon to play the procedure.
Par. 3.2.2
Par. 6.5
.
Fig 6.5
Fig 6.6
Fig 6.7
https://www.youtube.com/
embed/eTL3NSUrZHQ?rel=0?rel=0
6
39
EN