quadient iA Series User Manual page 71

Running Mail by Weighing Mode
• Dynamic weighing uses the inline Dynamic Weighing Module
Using the Dynamic Weighing Module
• Standard weighing uses the external Weighing Platform
the External Weighing Platform
3
• Differential weighing uses the external Weighing Platform, but allows the user
to place a stack or container of mail on the platform
Weighing Modes
• Manual weight entry allows the user to enter in a manual weight
in Manual Weighing Mode
Using Labels
You may print postage on precut, self-adhesive labels or thermal, pressure sensitive
roll tape.
A label dispenser is available:
• Internal label dispenser (ILD) for precut labels. This is a standard feature on the
Mailing System. See
Running Mail Using the Dynamic Weighing Module
The Dynamic Weighing Module uses a four-point detection system to weigh and rate
mail. It measures the length, width, thickness and weight to properly determine the
mailing format within the mail class and rate the mail pieces. Two modes are available
when using the Dynamic Weighing Module:
• Dynamic weighing - Weigh All: the Dynamic Weighing Module measures and
weighs each piece. Use this for mixed mail rating.
• Weigh First Piece: the Dynamic Weighing Module only measures and weighs
the first piece for an identical batch of mail. Use this to validate the correct rate
for the first piece. By using this mode, you will set the mail class for reporting and
print the mail class inscription on the envelope.
66
on page 68)
on page 70).
on page 72).
Filling the Internal Label Dispenser
on page 66)
(Running Mail in Differential
on page 125.
(Running Mail
(Running Mail Using
(Running Mail