How To Use The Feeder - quadient iA Series User Manual

Using the Feeder
The steps below describe how to place a stack of mail on the feed hopper.
In each stack, you may mix envelopes of different size, thickness and flap formats
(nested or closed).
You may process certain types of envelopes in both landscape and portrait mode.
3

How to Use the Feeder

Procedure
Taking a stack of mail:
1. Arrange the mail according to their size (largest and heaviest on the bottom).
2. Fan the envelopes to ensure separation (sometimes envelopes may be stuck
together).
3. Bevel the edge of the stack.
4. Place the envelopes on the hopper against the rear wall and covering the optical
(clear) sensor. Be sure that all envelopes in the stack are against the rear wall.
Ensure that all the envelopes are stacked along the rear guide, from largest to
smallest.
116
Nested envelope flaps: insert the flaps into the slot at the rear
guide of the envelope hopper.
Do not try to seal self-adhesive envelopes. Close them before
feeding.