Running Mail In Standard Weighing Mode - quadient iA Series User Manual

Running Mail Using the External Weighing Platform
The external Weighing Platform is used for large, heavy or bulky mail that cannot be
run through the Mailing System with a Dynamic Weighing Module. On the other hand,
if you do not have the optional Dynamic Weighing Module, you will need to use the
platform to weigh and rate all your mail. You may weigh and rate mail to print directly
on the mail piece, or print a label that will be applied to the mail piece.
3
Once you have performed the recommended procedures
Steps on page 46 and
ready to run mail.
Follow the procedure below to use the Weighing Platform.

Running Mail in Standard Weighing Mode

Procedure
1. Put the mail piece on the external Weighing Platform (WP).
The weight of the mail piece is updated in the Weight area of the screen and the
postage amount displayed.
You can print directly on the mail piece or on a label if the mail piece is too thick
or too large to process through the machine (see
To print on one or several identical envelopes
1. Press [Start]. The system motors start running.
2. Remove the envelope from the WP.
68
Recommended Steps for Processing Mail
At any time, to stop the motors and printing, press
machine will process mail piece(s) already in system and then
stop.
(Recommended Mail Processing
on page 65), you are
Mail Specifications on page 346).
. The