quadient iA Series User Manual page 92

3. You can also check (or change) all the print settings by using the Impression
Settings screen:
Press
The Imprssion Settings screen is displayed.
You are now ready to print.
4. Place the envelope (or identical set) on the hopper. Mail should be placed against
the rear wall and covering the optical (clear) sensor. The recommended print area
on the envelope is either on the back or upside down on the front. Press [Start].
The Mailing System prints the mail and sends it to the catch tray.
Running 'Seal Only Mail' (Sealing or Counting only)
The Task [Seal Only] allows you to:
• Run mail for "sealing only" without printing
• Only convey mail – without printing or sealing – for counting or testing purposes.
and select the path: Impression Settings
3
87