LAN Settings
How to Set LAN Parameters
You have to connect as a Supervisor (see
Procedure
To set the parameters of the LAN:
1.
As supervisor:
8
From the main menu, select the path:
The LAN configuration menu is displayed.
2.
Select:
- DHCP ON
- DNS AUTO ON
- Half duplex
Press [OK] to validate.
3.
The screen will show:
- System IP address [Settings done]
- Subnet mask [Settings done]
- Default Gateway IP Address [Settings done]
Press [OK].
4.
Set parameters in the next screen:
- Preferred DNS IP Address [Settings done]
- Alternate DNS IP Address [Settings done]
Press [OK].
5.
Proxy is OFF by default.
6.
Press [OK], the system will come back to the beginning screen and accept any
changes.
276
LAN settings can only be performed if the machine is connected
to the LAN at power-up.
How to Log in as Supervisor
Communication Settings
on page 236).
LAN Settings
Need help?
Do you have a question about the iA Series and is the answer not in the manual?