Steps To Run Mail In Differential Weighing Modes - quadient iA Series User Manual

Running Mail in Differential Weighing Modes
Differential weighing offers faster, more efficient mail processing when using an external
Weighing Platform (WP). In this mode, you can place a stack or container of mail on
the Weighing Platform. The weight is then calculated as each mail piece is removed
from the Weighing Platform (by calculating the differential from the amount on the
Weighing Platform less the weight removed).
3
Two differential weighing modes are available:
• Differential Weighing: when a mail piece is removed from the WP, the weight
is determined, the rate is automatically set and the envelope hoppers' motors
start to run. If a tape is required in this mode, simply press the Label button.
• Differential Weighing Auto-Tape: when a mail piece is removed from the WP,
the weight is determined, the rate is automatically set and a label is immediately
printed.
Follow the steps below for each of the two differential weighing modes.

Steps to Run Mail in Differential Weighing Modes

Procedure
In Differential Weighing Mode (
From the home screen:
1. Select the weighing mode, place the stack of mail (or container) on the Weighing
Platform, then follow the instructions on the screen or the steps below.
2. Remove the first piece of mail from the top of the stack. The Mailing System
displays the weight and postage, then automatically starts the Feeder and machine
motors.
70
To quit the Differential Weighing Mode and go back to the
Standard Weighing mode, press Exit on the home screen.
When you remove the last object from the WP, the Mailing
System asks for a confirmation before printing. This allows you
to use a mail basket without having to first tare the WP.
)