Table of Contents
Advertisement
How to Activate the Quiet Mode
Procedure
1.
As user:
Select
The Quiet Mode screen is displayed.
2.
Select Noise Reduction ON or Noise Reduction OFF.
The screen is closed and the previous screen is displayed.
Setting the Default System Quiet Mode
As supervisor, you can set the default system Quiet mode.
How to Set the Default System Quiet Mode
You have to connect as a Supervisor (see
Procedure
To set the mode by default:
1.
As supervisor:
From the main menu, select the path:
Default Quiet Mode
The Default Quiet Mode screen is displayed.
2.
Select Noise Reduction ON or Noise Reduction OFF.
The screen is closed and the previous screen is displayed.
Press
on display
Settings
How to Log in as Supervisor
and select the path:
Silent Mode
Default User Settings
System
8
on page 236).
Base Settings
271
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the iA Series and is the answer not in the manual?