How To Activate / De-Activate Checking On Zero Weight - quadient iA Series User Manual

Checking on Zero Weight
The function Zero Weight can be activated/de-activated by the supervisor.
When the function is de-activated, the [Permit Mail] type of impression may not be
captured. The weight values in the Permit Report may then be inaccurate (inaccurate
averages for instance).

How to activate / de-activate Checking On Zero Weight

You have to connect as a Supervisor (see
Procedure
To activate/de-activate 'Zero Weight Check' function:
1. As supervisor:
8
From the main menu, select the path:
Zero Weight Check
2. The Zero Weight Check screen is displayed.
3. Select Activated to start checking on Zero Weight or De-activated to end checking
on Zero Weight.
4. Click OK to validate your selection.
5. A warning window appears explaining when you should use 'Zero Weight Check'.
Click OK to confirm or Cancel to keep the previous activation state.
240
How to Log in as Supervisor
Default User Settings
on page 236).
Base Settings