Steps To Run Mail In Dynamic Weighing Modes - quadient iA Series User Manual

Steps to Run Mail in Dynamic Weighing Modes

Procedure
In Weigh all mode (
From the home screen:
1. Place your stack of mail in the hopper.
For more details, see
2. Press [Start] to process the stack.
The system will now feed (seal), weigh, rate, impression and stack the mail.
In Weigh First Piece Mode (
1. Place your stack of same size/weight mail in the hopper.
For more details, see
2. Press [Start].
The system weighs the first mail piece and asks you to confirm the postage amount
before applying it to all the mail pieces.
3. Press [OK] to confirm.
The system will now feed (seal), impression and stack the mail without weighing
the remainder of the batch.
)
Using the Feeder
At any time, to stop the motors and printing, press
machine will process mail piece(s) already in system and then
stop.
)
Using the Feeder
on page 116.
on page 116.
3
. The
67