20.11 Mode Switch While Acquisition In Progress; Figure 16 Mode Switch While Acquisition In Progress - Varex Imaging Azure 3131Z Manual

20.11 Mode Switch While Acquisition in Progress

The VSP2 API uses function
vsp2_fluoro_acquisition_stop()
(for a specified mode). A parameter of the start function (
the acquisition as Continuous (
running as a Continuous acquisition, the mode can be changed while the acquisition is in
progress by using the
mode to change to. In this case, there is no need to stop the acquisition before changing the
mode, see Figure 15, on page
If the acquisition is for a number of frames, the mode cannot be changed
using the
Note
must be stopped (
acquisition can be started in different mode.

Figure 16 Mode Switch While Acquisition in Progress

38
vsp2_fluoro_acquisition_start()
to control the beginning and end of Continuous acquisition
num_frames = 0
vsp2_fluor_acquisition_mode_change()
37.
vsp2_fluor_acquisition_mode_change()
vsp2_fluro_acquisition_stop()
www.vareximaging.com
Azure 3131Z - 4131Z Reference Manual
and
num_frames
) or for a number of frames (
function, which specifies the
) specifies whether to run
num_frames > 0
function. Acquisition
) before another
). If