Varex Imaging Azure 3131Z Manual page 6

Before You Begin
Caution
Note
Note
Interface and External Power Supply and Cables
WARNING
WARNING
WARNING
WARNING
vi
An Image Quality Test or Customer Acceptance test should be
performed before the X-ray detector is used for the first time with
patients.
All parts of the X-ray detector are suitable for use within the patient
environment.
The X-ray detector is designed to be integrated into a complete X-ray
system by a qualified system integrator. The system integrator is
responsible for obtaining FDA clearance for medical use.
Be sure to turn OFF the power of the X-ray detector, including turning
off the power supply before servicing, maintaining, connecting, or
disconnecting the cables or accessories.
Do not touch the power supply, X-ray detector, cable, connector, or any
other electrical component or equipment with wet hands. Ignoring this
warning may cause electrical shock, which may result in severe
personal injury, death, or substantial product damage.
Disconnect the cables by pulling on the connector and not the cable
itself. Ignoring this warning may cause electrical shock, which may
result in severe personal injury, death, or substantial product damage.
Do not modify the cables or subject the cable to external stress or
damage. Avoid placing anything heavy, including the X-ray detector,
on the cable, stepping on the cable, pulling the cable, or subjecting the
cable to excessive bending or bundling. Ignoring this warning may
cause cable failure resulting in electrical shock, which may result in
severe personal injury, death, or substantial product damage.
www.vareximaging.com
Azure 3131Z - 4131Z Reference Manual