Connecting To The X-Ray Detector Using Viva Pro; Table 11 Uri Example - Varex Imaging Azure 3131Z Manual

12.8

Connecting to the X-ray Detector using Viva Pro

Double-click on the Viva Pro short cut
application. If you need help or user documentation on Viva Pro, please see the application help
pages or the Viva Pro User Manual in the
Viva Pro is a software application included by Varex Imaging to connect to a
detector. It has its own documentation and instructions on how to run this
Note
application. Please see the Viva Pro documents for detailed information.
If you have problems using this software application, please see the Viva Pro
documentation and help files or contact your Varex Imaging Applications
Note
Engineer for further assistance.
Click Connection button
1
detector is found, follow the prompts to setup a new detector.
Click Yes on the dialog box to setup a new detector.
2
The detector Setup dialog box is displayed. A Uniform Resource Identifier (URI) is required to
connect to the detector.
Table 11 URI Example
Detector
Interface
Ethernet vrxnet://[detector IP address]
You are now connected to the detector.
3
16
\docs
in the tool bar (left side) to connect to the detector. If no
Table 11 provides an example of the URI for Ethernet detectors:
URI Format
www.vareximaging.com
Azure 3131Z - 4131Z Reference Manual
or the VivaPro.exe file to open the Viva Pro
folder.
Example
vrxnet://169.254.1.240
Detector
Azure 3131Z and 4131Z