Varex Imaging Azure 3131Z Manual page 8

Before You Begin
Caution
Caution
Caution
Caution
Note
If a Problem Occurs
WARNING
WARNING
viii
Do not exceed the maximum uniform load weight of 150 kg
distributed across the surface of the X-ray detector.
Do not exceed the maximum load weight of 100 kg distributed on an
area of 40 mm in a diameter of the X-ray detector surface.
Do not drop the X-ray detector. If the X-ray detector is dropped,
remove the X-ray detector from service, and immediately ask your
establishment's safety representative to verify or re-validate the
proper function of the X-ray detector prior to resuming use of the
X-ray detector. Further use under abnormal conditions may result in
severe personal injury, death, or substantial product damage.
Do not expose the backside of the X-ray detector with X-rays. Always
use the top side of the X-ray detector for examinations.
The proximity of the X-ray detector to the patient is dependent upon the
application by the system integrator.
If any abnormal condition, such as smoke, fumes, or strange sounds, is
evident, turn off the X-ray detector, turn off and unplug the power
supply from the AC outlet, and immediately ask your establishment's
safety representative to contact your dealer, distributor, or device
manufacturer.
Further use under abnormal conditions may result in severe personal
injury, death, or substantial product damage.
When liquid has been spilled into or on any part of the X-ray detector
or power supply (if applicable), or when the X-ray detector, its
component, or accessory is dropped, unplug the power supply from
the AC outlet, and immediately ask your establishment's safety
representative to contact your dealer, distributor, or device
manufacturer.
Further use under abnormal conditions may result in severe personal
injury, death, or substantial product damage.
www.vareximaging.com
Azure 3131Z - 4131Z Reference Manual