Azure 3131Z - 4131Z Reference Manual
20.6
Acquisition Timing
This section contains a description of acquisition sequences. It is possible to calculate the timing
for each sequence considering the readout time of the detector in the chosen mode.
See Information on readout time and mode details can be found in the dedicated detector
specifications. See
Table 15 on page 25
for more information.
The mode switch will require a maximum of 500 ms to be completed. Any frames received within
500 ms should be considered settling frames and should not be used.
The Internal Sync referenced in the schematics is an internal detector trigger.
Note
www.vareximaging.com
33