Table of Contents
Advertisement
3.2.
FRONT PANEL DISPLAY FUNCTIONS
OPERATING INSTRUCTIONS
Model 5950-SID VITC Reader / Source ID Decoder Manual
SETUP
Initiates SETUP mode and displays the on screen programming
menu. Pressing the SETUP key again exits the SETUP mode.
SELECT When in the SETUP mode the SELECT key is used to choose
items from within a drop down menu or sub menu.
! " # $ When in the SETUP mode, the arrow keys are used to move
between various items in the menu system.
When in the VCG window select mode, the arrow keys are used
to position individual windows on the screen. (See also section
3.3.1.)
When not in either the SETUP or VCG window select modes,
the arrow keys are used to position all the windows on the
screen. (See also section 3.3.2.)
3.1.2. Overview of the Status Indicators
There are six status indicators that show operational status at a glance.
DISPLAY LTC
Not used on the 5950-SID
DISPLAY VITC Indicates that the data being displayed is from the VITC
reader.
GEN LCK PAL Indicates that the 5950-SID is properly genlocked to a
PAL video reference. If it is blinking, it indicates that the PAL
video standard is selected, but a valid PAL video reference is
not present.
GEN LCK NTSC Indicates that the 5950-SID is properly genlocked to a
NTSC video reference.
NTSC video standard is selected, but a valid PAL video
reference is not present.
PRESENT LTC Not used on the 5950-SID
PRESENT VITC Indicates that the VITC reader is reading valid code.
The TIME/UB key is used to select which data is being displayed in the
alphanumeric display. Each time it is pressed it cycles to the next display
data. Currently there are three types of display data:
ID:
VTR-10
STATUS: STOP VTR Status
12:34:56:00
If it is blinking, it indicates that the
Source ID Message
VTR Timecode
Page 3-2
Advertisement
Table of Contents
