Table of Contents
Advertisement
3.2.
FRONT PANEL DISPLAY FUNCTIONS
3.2.1. Front Panel Displays
The DISPLAY key is used to select what data is being displayed in the alphanumeric display. After you
press the DISPLAY key, you can use the shaft encoder knob to select the various Display items. The
leftmost characters of the display indicate what is being displayed as follows:
GTM
12:34:56.00
GUB
12 34 56 78
LTM
12:34:56.00
LUB
12 34 56 78
XTM
12:34:56.00
XUB
12 34 56 78
ATM
12:34:56.00
AUB
12 34 56 78
COM1: ACTIVE
COM2: NOT ACTIVE
GPI: 111111111
SRC ID: AAAAAAAAA
3.2.2. Special Front Panel Indicators
The following special indicators are used between the seconds and frames digits of the front panel time
display to identify non-drop frame and drop frame code when the time code is counting at 29.97 frames
per second.
Non Drop Frame
Drop Frame
3.3.
PROGRAMMING A SOURCE ID MESSAGE INTO THE ENCODER
The HD9010-SIE encodes a source ID message of up to 9 alphanumeric characters, and is shown in
the following format:
AAAAAAAAA
The A represents alphanumeric message characters. Leading spaces in the source ID message are
automatically blanked and the messages are right justified.
3.3.1. Source ID Data Entry Mode
A special data entry mode is provided to allow the user to program the source ID message. Press
DISPLAY and turn the SHAFT ENCODER until the SRC ID is displayed on the front panel. Press
ENTER (SELECT) to enter the Source ID programming mode. The SHAFT ENCODER and ENTER
keys are used to select individual characters in the message and change them.
The following detailed procedure should be used to enter the source ID message.
OPERATION
HD9010-SIE High Definition Source ID Encoder Manual
Generator time information
Generator user bit information
LTC Reader time information
LTC Reader user bit information
AUX LTC Reader Time information
AUX LTC Reader user bit information
RP188 Ancillary Reader Time information
RP188 Ancillary user bit information
Com 1 status information
AUX COM status information
GPI Input status information
Source ID information
Colon (:)
Period (.)
Revision 1.2
Page 3-6
Advertisement
Table of Contents
